-
SST exhaust flap / valve control suitable for Porsche 911 Type 991.1 YOC 2011 – 2017
This plug-and-play control unit gives you the option to open or close the exhaust flaps as you wish. The control unit works without any problems with the standard exhaust system. The effect is even stronger in combination with a sports exhaust system.
This control unit may not be installed in vehicles with an ABE/road approval within the European Union! This will lead to the expiry of the vehicle's operating license! Only for use in racing, for show purposes or for export! Please inform yourself in advance about the legal regulations applicable in your country for the installation of flap controls!
- Origin: Made in Germany
- Installation location: Engine Compartment (control unit waterproof and invisible from the outside)
- number of controlled flaps: 1 or 2 (depends on the vehicle)
- compact metrics: 65x50x35 mm
Suitable for the following engines:
- Porsche 911 Carrera (Type 991.1) 257 kW / 345 hp (YOC 2011 - 2015) -> see note below
- Porsche 911 Carrera 4 (Type 991.1) 257 kW / 345 hp (YOC 2012 - 2015) -> see note below
- Porsche 911 Carrera S (Type 991.1) 294 kW / 394 hp (YOC 2011 - 2015) -> see note below
- Porsche 911 Carrera S (Type 991.1) 304 kW / 408 hp (YOC 2011 - 2015) -> see note below
- Porsche 911 Carrera S (Type 991.1) 316 kW / 424 hp (YOC 2011 - 2015) -> see note below
- Porsche 911 Carrera 4S (Type 991.1) 294 kW / 394 hp (YOC 2011 - 2015) -> see note below
- Porsche 911 Carrera 4S (Type 991.1) 304 kW / 408 hp (YOC 2011 - 2015) -> see note below
- Porsche 911 Carrera 4S (Type 991.1) 316 kW / 424 hp (YOC 2011 - 2015) -> see note below
- Porsche 911 Carrera GTS (Type 991.1) 316 kW / 424 hp (YOC 2012 - 2015) -> see note below
- Porsche 911 Carrera 4 GTS (Type 991.1) 316 kW / 424 hp (YOC 2012 - 2015) -> see note below
- Porsche 911 GT3 (Type 991.1) 350 kW / 469 hp (YOC 2013 - 2015)
- Porsche 911 GT3 RS (Type 991.1) 368 kW / 494 hp (YOC 2015 - 2017)
Easy installation:
The control unit arrives pre-assembled and pre-programmed including illustrated installation and operating instructions. Thus, the assembly is done easily and quickly in a short time.
Guaranteed compatibility:
The control unit integrates seamlessly into the vehicle electronics, is 100% compatible with the specified vehicle types and does not cause any errors in the vehicle electronics. Nothing has to be changed on the vehicle for installation. The device does not consume any quiescent current when switched off and does not affect the on-board electronics.
You choose the appropriate mode yourself:
- Sport mode: Flap(s) permanently open -> sound volume increased
- Comfort mode: Flap(s) permanently closed -> sound volume reduced
- Factory mode: Control of the flap(s) as before in the stock configuration
Additional features:
You later decide for yourself whether the control unit remembers the last set mode, which is then automatically reactivated the next time the engine is started or whether, for example, a certain mode should always be activated when starting the engine, regardless of the last setting.
Attention: For all Porsche 911 Carrera: only up to model year 2015 and VIN 111978 (last 6 digits)